Advertisement
Installation Guide | 1000 Hz Control Card MK-I
1
1 T10 screws
Illustration 8:
Screws and EMC Shield
10. Unscrew the 3 T10 screws and remove them.
11. Gently remove the control card from the upper-right socket. Avoid overbending and contact with electronic components.
1 Control card
Illustration 9:
Control Card and T10 Screws
12. Re-assemble the new control card in reverse order.
8 | Danfoss A/S © 2018.11
2
1
2
2 EMC shield
2 T10 screws
Installation
AN281754171207en-000101 / 130R0878
Advertisement
