Danfoss 1000 Hz Control Card MK-I Installation Manual page 3

Installation Guide | 1000 Hz Control Card MK-I
Minimum waiting time (minutes)
525 V
525–600 V
525–600 V
690 V
When the new control card is installed in the drive by a local Danfoss company or a local Danfoss partner company, the
extra 1000 Hz label, which is in the box, must be placed visible on the drive. The label indicates that the drive is updated to
run with maximum 1000 Hz speed. Fill in the data to the confirmation letter, scan it, and then send it to:
ddsexportcontrol@danfoss.com.
Update to 1000Hz
output frequency.
Now the drive will
fall under the export
regulation ECCN 3A225
Label above must be
placed visible on the drive
1 3 0 A 0 3 9 7
Illustration 1: 1000 Hz Label
Danfoss A/S © 2018.11
4 7
– –
0.75–7.5 kW –
(1–10 hp)
– 1.5–7.5 kW
(2–10 hp)
– 1.5–7.5 kW
(2–10 hp)
C A U T I O N
15 20
– 55–315 kW
(75–400 hp)
11–75 kW –
(15–100 hp)
11–75 kW 37–315 kW
(15–100 hp) (50–450 hp)
11–75 kW 55–315 kW
(15–100 hp) (75–400 hp)
AN281754171207en-000101 / 130R0878 | 3
Safety
30 40
– –
– –
355–1200 kW 355–2000 kW
(450–1550 hp) (450–2050 hp)
355–710 kW
(400–950 hp)
– –