Advertisement
Installation Guide | 1000 Hz Control Card MK-I
1 Location of A option
3 I/O terminals
Illustration 6:
Location of Options and I/O Terminals
6. Unscrew the 3 T10 screws and remove the cable shield.
7. Remove the plastic cover underneath the cable shield.
1
1 Cable shield
3 T10 screws
Illustration 7:
Location of Cable Shield, Screws, and MCO Ribbon Cable
8. Unscrew the 2 T10 screws holding the control card EMC shield (4 screws if MCO is installed).
A If MCO is installed, remove the MCO ribbon cable.
9. Remove the control card EMC shield.
Danfoss A/S © 2018.11
1
2
3
2
3
2 Location of B option
2 MCO ribbon cable
AN281754171207en-000101 / 130R0878 | 7
Installation
Advertisement
