Ethernet Access; Record Change Settings - Dialight IntelliLED Quick Start Manual

Connecting via Ethernet
• Ensure your IntelliLED
net capable device connected to the Ethernet port on the IntelliLED
Gateway (located on the bottom of the unit)
• Access your devices local network settings and change your IP to the
following:
• IP: 192.168.1.1
• Subnet: 255.255.255.0
NOTE: Before attempting this step, please familiarize yourself with the
IP address settings of your device
• Allow 1-2 minutes for device to connect
• Open supported web browser (see above) and enter the following web
address: http://192.168.1.150
• The login page for the IntelliLED
prompt you for a username and password:
• Username: admin
• Password: password

Record Change Settings

www.dialight.com
TM
Gateway is powered on and you have an inter
TM
Record IP Settings
IP address:___________________
Subnet Mask:_________________
Gateway:_____________________
Record Login Settings
User Name: ______________
Password: _______________
IntelliLED
Controls System should load and
Gateway
TM
TM
9