Getting Started; What You Will Need; Mounting Considerations (Best Practices) - Dialight IntelliLED Quick Start Manual

Getting Started

What You Will Need

• Dialight IntelliLED
• AC power 100-277 VAC, 50/60Hz (14AWG (2.08mm) minimum 8AWG
(10.5mm ) maximum
• Mounting hardware (3/8 inch / 9.5mm through holes x 4)
• Ethernet Cable (optional)
• Network Settings (provided by IT department)
• Computer with Ethernet or Wireless connectivity
Note: Refer to Gateway Manual for detailed mounting instructions/considerations
Choosing a Mounting Location (Best Practices)
• The Gateway should not be mounted in wet zones or exposed to
extreme moisture conditions.
• For optimal performance, Gateway should have direct Line of Sight (LoS)
to at least one fixture to be controlled.
• Ensure that the mounting hardware is securely fastened to a solid
backing.
• If possible, mount the gateway in a central location to your lights.
• Avoid mounting under obstructions such as stairs or metal caging.
• The Gateway will have reduced connectivity when communicating
through walls or other obstructions (machinery/cages).
• If possible, mount the gateway so buttons/informational LEDs are easily
seen/accessible.
www.dialight.com
TM Gateway
IntelliLED Gateway
TM
6