Introduction; Intelliled; Gateway; Technical Specifications - Dialight IntelliLED Quick Start Manual

Hide thumbs Also See for IntelliLED:
Table of Contents

Advertisement

Introduction

What is a Dialight IntelliLED
The Dialight IntelliLED
can be used to connect, configure and manage up to 120 connected
Dialight wireless nodes. These include light fixtures, occupancy and daylight
harvesting sensors. The Gateway offers quick set-up and commissioning
of your lighting system. The Graphical User Interface (GUI) on-board the
Gateway may be accessed via a direct Ethernet connection using a laptop
or over WiFi. When a Gateway is disconnected or powered off, the lighting
system will default to an Emergency 100% ON state.

Technical Specifications

Certification
AC Operating Voltage
Operating Temperature
Ethernet
Dimensions (WxDxH)
Dialight Part #
Ratings
Quick Disconnect
Cat5 Ethernet cable (use port marked X2 only) and AC Power Cable
www.dialight.com
TM
Gateway is a standalone wireless controller, which
UL 916, CSA C22.2 No.205, FCC part 15, Canada IC, CE,
EN55032, EN 55016-2-1, EN 55016-2-3, EN 61000-3-2, EN 61000-
3-3, EN 61000-4-2, EN 61000-4-3, EN 61000-4-4, EN 61000-4-5
EN 61000-4-6, EN 61000-4-11, NEMA 4X, IP66
100-277 VAC, 50/60Hz
o
o
-40
C to +65
C
10/100/Gb Ethernet
13.09 x 15 x 21.214 | 323.5mm X 382mm X 538,84mm
GAUW24AG
Install only dry locations, IP66
This device must be connected to a quick disconnect device, such
as a circuit breaker
Equipment not supplied:

IntelliLED

Gateway?

TM
Gateway
TM
4

Advertisement

Table of Contents
loading

Table of Contents