Download Print this page
Viking Range VGIC5301 Installation Manual

Viking Range VGIC5301 Installation Manual

Range / rangetop
Hide thumbs Also See for VGIC5301:

Advertisement

Quick Links

Installation
GUIDE
Range / Rangetop
Rear Island Trim / Backguard / High Shelf Accessories
Range Curb Base Fronts

Advertisement

loading

Summary of Contents for Viking Range VGIC5301

  • Page 1 Installation GUIDE Range / Rangetop Rear Island Trim / Backguard / High Shelf Accessories Range Curb Base Fronts...
  • Page 2 Rear Trim Accessories MODELS BACKGUARD HIGH SHELF CURB BASE VGIC5301 P30BG8SS B304H24SS P30CBF4SS VGCC530 C/VDSC530 C/VESC530 C/VISC530 VGRT530 C/VER530 C/VIR530 VGCC536 P36BG8SS B36HS24SS P36CBF4SS C/VDSC536 VGRT536 VGCC548 P48BG8SS B48HS24SS P48CBF4SS C/VDSC548 VGRT548 VGCC560 P60BG8SS B60HS24SS P60CBF4SS C/VDSC560 VGR530 BG8530SS HS24530SS...
  • Page 3: Rear View

    Rear Trim Accessories All rear trim devices are installed in the same basic way. ATTACHING REAR TRIM (Illustration I) Grasp the trim on each end and carefully place in the channels (B) located at each rear corner of the product. Align the screw holes (A) at each end of the trim device with the holes (A) in each rear channel of the product.
  • Page 4 Rear Trim Accessories ATTACHING BACKGUARD (Illustration 3) Backguards come equipped with Nylon Spacers (See Figure 1), which are needed to space the range off a combustible wall a prescribed safe distance. Figure 1 Note: If the back wall is Non-Combustible, these spacers can be removed.
  • Page 5 6” (15.2 cm) of minimum clearance to a rear wall, or when a truly non-combustible material is used, will the warranty apply. In no case will Viking Range, LLC accept responsibility for any claims which may result from heat damage against a rear wall, including cosmetic damage.
  • Page 6 CURB BASES STANDARD CURB BASE FRONT 1. The standard curb base front (A) is completely assembled. 2. Remove the assembly from the carton and simply clip onto the front range legs. 3. The assembly is adjustable about 2” (5.1 cm) front to back so that alignment with the cabinet toe front is possible. Loosen brackets on each side, but allow snug fi t.
  • Page 7 CURB BASES CUSTOM CURB BASE FRONT 1. Remove the standard curb base front assembly from the carton. 2. Remove the front (A) from the mounting assembly (B). 3. Attach locally supplied front (C) to the mounting assembly (B) ad simply clip onto the front range legs. Important Note: The locally supplied front must not be any taller than 3-1/8”...
  • Page 8 Viking Range, LLC 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For additional product information, call 1-888-845-4641 or visit our website at vikingrange.com F1448R (100118)

This manual is also suitable for:

Vgcc530C/vesc530C/visc530C/ver530Vgrt530C/vdsc530 ... Show all