Lightcloud Devices - RAB Lighting FXLED Installation Instructions Manual

Functionality
Configuration
To pair the Dimmer with a zone, assign scenes or
perform other configuration, use the Lightcloud
web application or call RAB:
WE ' RE HERE TO HELP:
1 (844) LIGHTCLOUD
or 1 (844) 544-4825
Overview
NETWORK
INDICATOR
SIGNAL
STRENGTH
INDICATOR
TOP BUTTON
DEVICE
BUTTON
BOTTOM
BUTTON
DEVICE BUTTON
• Single press: Indicate in Lightcloud application
• Hold for 10 seconds: Force device to leave current
DIM LEVEL INDICATOR:
• Displays current dim level (Zone mode)
NIGHTLIGHT:
• White: Lit when zone is o so you can find the
SIGNAL STRENGTH INDICATOR:
• Indicates strength of the connection to next
NETWORK INDICATOR:
• Solid green: Connected to a Lightcloud network
• Blinking red: Not connected to a Lightcloud network
DIM LEVEL
INDICATOR
TOP AND BOTTOM BUTTONS:
NIGHT
Functionality depends on which mode is being used;
LIGHT
see next page for details.
(press using paperclip)
Lightcloud network
dimmer
Lightcloud Device
The network and signal strength indicators are lit for
10 minutes following initial power on. To display the
indicators later on, simply press the device button once.
: