Troubleshooting/Reset Button; Care And Maintenance; Specifications - Sangean ATS-505P Operating Instructions Manual

Troubleshooting/RESET button

If the radio fails to operate correctly, or some digits on the display are missing or
incomplete. carry out the following procedure.
1.Switch off the radio and remove the batteries.
2.With the aid of a suitable implement (the end of paper clip or pen), press the
RESET button located at the bottom side for at least 1 seconds, this will reset the
Microprocessor, clock time and clear all stations stored in the preset memory.

Care and maintenance

Do not allow this radio to be exposed to water, steam or sand. Do not leave the
radio where excessive heat could cause damage such as in a parked car where the
heat from the sun can build up even though outside temperature may no seem too
high.

Specifications

Frequency range
FM
MW
SW 120 m
90 m
75 m
60 m
4 9 m
4 1 m
31 m
2 5 m
2 1 m
1 9 m
16 m
15 m
13 m
11 m
87.50 - 108 MHz
520 - 1710 or 522 - 1710 kHz
2.3 -2.495
3.2 - 3.4
3.85 - 4.0
4.75 - 5.06
5.9 - 6.2
7.1- 7.35
9.4 - 9.99
11.6 - 12.1
13.5 - 13.87
15.1 - 15.8
17.48 - 17.9
18.9 - 19.02
21.45- 21.75
25.6 - 26.1
MHz
MHz
MHz
MHz
MHz
MHz
MHz
MHz
Mhz
MHz
MHz
MHz
MHz
MHz
12