MDT AKI-0416.01 Technical Manual page 41

MDT Switch Actuator 4/8/12-fold, MDRC
Version
AKI-0416.01 Switch Actuator 4-fold
AKI-0816.01 Switch Actuator 8-fold
AKI-1216.01 Switch Actuator 12-fold
The MDT Switch Actuator receives KNX/EIB telegrams and switches up to 12 independent electrical loads . Each output
uses a bistable relay and can be operated manually via a push button. A green LED indicates the switching status of
each channel. The MDT Switch Actuator is suitable for extreme high inrush currents and used for heavy loads (C-Load).
The outputs are parameterized individually via ETS3/4. The device provides extensive functions like logical operation,
status response, block functions, central function, delay functions and staircase lighting function. Additionally the device
provides several time and scene control. If the mains voltage fails, all outputs hold their current position. After bus voltage
failure or recovery the relay position is selected in dependence on the parameterization.
The MDT Switch Actuator has separate power supply terminals for each channel. It is a modular installation device for
ixed installation in dry rooms. It its on DIN 35mm rails in power distribution boards or closed compact boxes.
For project design and commissioning of the MDT Switch Actuator it is recommended to use the ETS3f/ETS4 or later.
Please download the application software at www.mdt.de/Downloads.html
AKI-0816.01
AKI-1216.01
51766 Engelskirchen
•
MDT technologies GmbH
Tel.: + 49 - 2263 - 880 Fax: + 49 - 2263 - 4588
•
Stand: 1012
MDT Switch Actuator AKI
12SU MDRC, 230VAC, 16/20A, C-Load 200uF
•
Papiermühle 1
• •
knx@mdt.de www.mdt.de
4SU MDRC, 230VAC, 16/20A, C-Load 200uF
8SU MDRC, 230VAC, 16/20A, C-Load 200uF
• Production in Germany, certiied according to ISO 9001
• Push Button and LED indicator for each channel
• NO and NC contact operation
• Status response after manually operation
• Time functions (swich-on/switch-off delay)
• Staircase light function with adjustable warning time
• Status response (active/passive) for each channel
• Logical linking of binary data, 8 scenes per channel
• Central switching functions and block functions
• Programmable behavior in case of bus voltage failure or return
• Separate power supply terminals for each channel
• AKI 04/08: Power supply via KNX bus
• AKI 12: Power supply 230VAC, from Q4 2012 via KNX bus
• Modular installation device for DIN 35mm rails
• Integrated bus coupling unit
• 3 years warranty
N
DIN EN ISO 9001
TAW Cert
Zert.Nr.1905606