Nikon Z 7 Reference Manual page 458

Focus
Focus points
(single-point AF, photo
shooting mode, FX image
area)
AF-area mode
Focus lock
Vibration reduction (VR)
Camera VR
Lens VR
Flash
Flash control
Flash mode
Flash compensation
Flash-ready indicator
Accessory shoe
Nikon Creative Lighting
System (CLS)
434 Technical Notes
• Z 7: 493
• Z 6: 273
Pinpoint, single-point, and dynamic-area AF
(pinpoint and dynamic-area AF available in
photo mode only); wide-area AF (S); wide-area
AF (L); auto-area AF
Focus can be locked by pressing shutter-release
button halfway (single-servo AF) or by pressing
center of sub-selector
5-axis image sensor shift
Lens shift (available with VR lenses)
TTL: i-TTL flash control; i-TTL balanced fill-flash is
used with matrix, center-weighted, and
highlight-weighted metering, standard i-TTL
fill-flash with spot metering
Front-curtain sync, slow sync, rear-curtain sync,
red-eye reduction, red-eye reduction with slow
sync, slow rear-curtain sync, off
–3 – +1 EV in increments of
in modes P, S, A, and M
Lights when optional flash unit is fully charged;
flashes as underexposure warning after flash is
fired at full output
ISO 518 hot-shoe with sync and data contacts
and safety lock
i-TTL flash control, radio-controlled Advanced
Wireless Lighting, optical Advanced Wireless
Lighting, modeling illumination, FV lock, Color
Information Communication, Auto FP High-
Speed Sync, unified flash control
1 / 1 /
or EV available
3 2