Cosy; Task Name - Control Data 3500 Reference Manual

4.1.3
COSy
4.1.4
TASK NAME
4-4
The COSY card directs MASTE R to load and execute the COSY task.
There are two card forms:
($COSY
( $COSY (n)
The parameter n controls printing of a COSY log, a listing of all control
cards and revision detail cards. If the first card form is used, the log
is printed on the OUT file. If there is a non-blank character within
parentheses, as in the second form, printing of the log is suppressed.
The COSY control card is an example of a Task Name card.
A Task Name control card directs MASTER to call and load the named
program task from the specified file (or from the library if no file is
specified), to pass parameters if given, and to begin execution of the task.
Usually, at least one Task Name card follows the SCHED cards for a job.
A Task l\'"ame card has one of the following forms:
($name
( $name,dsi
( $name, dSi(parameter string)
( $name (parameter string)
name
dsi
parameter
string
1-4 alphanumeric characters identifying the task to be called;
name is the only required parameter.
the dsi of an opened file from which the named task is to be
loaded. \Vhen dsi is zero or the field is omitted, MASTER
searches the system library for the task.
parameters used by the called task. MASTER removes any
spaces before passing the parameter string, with parentheses,
to the called task.