Delete - Control Data 3500 Reference Manual

3.2
DELETE/
When Hollerith, but not COSY, output is requested, no identification and
sequence numbers are inserted in columns 73-80 of revision cards;
***
is
inserted in columns 73-75 of these cards. If COSY output is requested,
identification and updated sequence numbers are placed on revi1:5ion cards.
Default
Mode
Precautions
If the DECK/ card contains no parameters ,COSy assumes
all input is from the standard input file, INP, and produces
no listing, revisions listing, Hollerith, or COSY output.
Hollerith input cards mayor may not contain the most signi-
ficant digits of the sequence numbers. If numbers are present,
the user must insure that they are in sequence.
Input and output must not be assigned to the same dsi.
This causes termination of the DECK/ or COpy! function
and produces an error message on the OUT file.
COSy or Hollerith output must not be assigned to dsi OUT
if L or R is desired. Listing and revisions listing have
lower priority than COSy or Hollerith output and will be
suppressed. Log, L, and
R
may all be specified, however,
if COSy and Hollerith are not requested on OUT. If COSy
and Hollerith output are specified to the same dsi, the
Hollerith output is suppressed.
The COSy log precedes any other type of output (C, H, R,
or L).
p6..I(O-\M-e~'~~.s ~S'
pQf
pe
C '(.(.
0..
Y'
~
Cl.
SS
Ii
1M
e
J
fa'( Jr '-f. 'f-
f
~
0.
t"
dS
t}J
~
.f
~
~ ~c'?( cQ.V'~.
COSy deletes a specified number of cards and replaces them by any Hollerith
cards immediately following a DELETE/ card. A DELETE/ card has two
forms:
(
(
10
DELETE/ m
10
DELETE/
mjn
In the first form card m is deleted; in the second, cards m through n are
deleted. The unsigned decimal numbers m and n are the sequence numbers
in columns 76-80 of the Hollerith cards.
The number of Hollerith cards following a DELETE/ need not equal the number
of cards deleted.
3-5