Advertisement
Quick Links
1
Modular Drawer Cabinets
Installation Instructions
——————IMPORTANT——————
PRODUCT LIABILITY INFORMATION
Read all instructions before proceeding with installation or
drawer loading. Vital product information pertaining to
proper set-up and cautions are included. Failure to follow
these instructions may cause failure which may result in
personal injury or property damage.
RETAIN THIS MANUAL FOR FUTURE REFERENCE
Borroughs Document Number: MDC-0730
www.borroughs.com
Borroughs Document Number: MDC-0730
www.borroughs.com/media
Advertisement
Related Manuals for Borroughs Modular Drawer Cabinets
Summary of Contents for Borroughs Modular Drawer Cabinets
- Page 1 Modular Drawer Cabinets Installation Instructions ——————IMPORTANT—————— PRODUCT LIABILITY INFORMATION Read all instructions before proceeding with installation or drawer loading. Vital product information pertaining to proper set-up and cautions are included. Failure to follow these instructions may cause failure which may result in personal injury or property damage.
- Page 2 Push cabinet back, engaging hardware. Remove bottom drawers (reference this document), and from the inside of the cabinet, tighten hardware via access holes in bottom pan. Borroughs Document Number: MDC-0730 www.borroughs.com Borroughs Document Number: MDC-0730 www.borroughs.com...
-
Page 3: Drawer Removal
Lift the front of drawer as you close. Closing the drawer fully will automati- cally lock the safety clips. Borroughs Document Number: MDC-0730 www.borroughs.com Borroughs Document Number: MDC-0730... - Page 4 Borroughs Document Number: MDC-0730 Borroughs Document Number: MDC-0730 www.borroughs.com...
- Page 5 Replace Drawers QTY (4) 3/8-16X1 flanged cap screw QTY (4) 3/8-16 serrated flanged locknut QTY (4) 3/8-16X1 flanged cap screw QTY (4) 3/8-16 serrated flanged locknut QTY (4) 3/8x1-1/4 fender washer Borroughs Document Number: MDC-0730 Borroughs Document Number: MDC-0730 www.borroughs.com...
- Page 6 MDC cabinet is in the un-locked state Ensure core key is fully seated While pressing on joint between core and key, pull-out and Remove core. Reverse steps to install new core Borroughs Document Number: MDC-0730 www.borroughs.com Borroughs Document Number: MDC-0730 www.borroughs.com...
- Page 7 Kick plate notches should integrate with forklift channels and snap into place. Duplicate process at back of cabinet, if necessary. NOTE: To remove, reverse process. (A flat screw driver may be required to disengage) Borroughs Document Number: MDC-0730 www.borroughs.com Borroughs Document Number: MDC-0730...
- Page 8 (T15 bit) that hold the SDA universal latch mount. latch assembly to the universal latch mount. Borroughs Document Number: MDC-0730 Borroughs Document Number: MDC-0730 www.borroughs.com...
- Page 9 Drill (2) 3/8” diameter holes 2” deep BACK SIDE OF CABINET For wooden floors: Drill (2) 1/4” diameter holes 1-3/4” deep CENTER OF HOLE TO BE DRILLED RIGHT SIDE OF CABINET Borroughs Document Number: MDC-0730 www.borroughs.com Borroughs Document Number: MDC-0730 www.borroughs.com...
- Page 10 Borroughs Document Number: MDC-0730 www.borroughs.com...
-
Page 11: Final Inspection Check List
Tie key bag through slot in the top drawer, hold key bag outside and close drawer. Lock cabinet and place second key bag. Apply trailer drawing to cabinet during stretch-wrapping process. Borroughs Document Number: MDC-0730 www.borroughs.com Borroughs Document Number: MDC-0730... - Page 12 3002 N. Burdick Street Kalamazoo, MI 49004 T: 800-748-0227 | f: 269-342-4161 www.borroughs.com Borroughs Document Number: MDC-0730...
Need help?
Do you have a question about the Modular Drawer Cabinets and is the answer not in the manual?
Questions and answers