To Navigate The Remote Control; Input; Functions In Sleep And Cec Mode; Volume - PointSource Montana Owner's Manual

To navigate the remote control

The remote control contains only 6 buttons, 2 small with only single press function and 4 bigger
buttons with up and down function.
Power
The first red power button is used to turn on and off the sound unit.

Functions in Sleep and CEC mode

 If CEC or Sleep is activated the MSU will enter sleep mode when the power button is
pressed.
 When holding down the "power button" 3sec the MSU will turn off.

Input

The second button is input select. The used always need to select manually from where the sound
comes from (Wifi, CD, BluRay, PlayStation ect.). When pressing "up" or "down" through the inputs
they will show in the sound unit display.

Volume

For turning the volume up and down.
Radio
The main function of the radio button is to select the pre-stored Radio stations. But the button
also works:
 In FM input mode to scan the FM range
 In DAB input mode to scan and store the DAB stations
 In WiFi mode to shift from wireless network and wireless direct and back
Functions in FM input mode:
 If the input mode is FM the button works to select the pre-stored FM stations by pressing
"up" and "down".
 When holding down the "upper" button 3sec it is possible to scan the FM frequency band
and search for next nearby station. The found station can only be permanently stored by
Important! The volume steps are divided into 100 steps.
They are very small to support all external mobile devices.
When adjusting the volume you can keep the volume
button down and the adjustment goes faster
Important! The function of the Radio button is depending
on the selected input and the time the button is pressed
down!