Advertisement
14. Position the assembled console on your desired location against the wall. Now follow the
instructions printed on the plastic white bag in order to mount the Tipping Restraint
Hardware Kit to the Back Panel (D) properly. As shown in detail #5.
NOTE: YOU MUST USE THIS TIPPING RESTRAINT TO ATTACH THIS UNIT TO THE
WALL, TO PREVENT ACCIDENTS AND/OR INJURIES.
15. The console is ready for use now. Be sure to position your TV in center of console with no
overhang on either side.
Tools Required: Allen Wrench (provided), Phillips Screwdriver, Mallet, Power Drill,
Please call for replacement parts or assistance:
VAS Furniture Mfg. Inc.
Assembly Instructions
and 3/8" Drill Bit.
1-866-942-5362
Factory No. 33-10944
Model # AVC9001GB
Page 8
Advertisement
