Advertisement
11. In case of uneven floor, simply tilt the unit back and adjust the Floor Levelers (6) attached at
the bottom of Bottom Shelf Frame (C) and correct tilting, until the unit is level. See detail #4.
12. Put the Suction Cups (1) firmly into the top holes of three Shelf Frames (A, B & C) in place.
Make sure the Suction Cups are inserted completely to prevent the glass shelf from falling
and getting damage. See detail #4A
13. Insert the Top Glass (E) and Glass Shelves (F) in place as shown in detail #4A. Be sure the
Top Glass is centered of the unit.
Note: Make sure that the Glass sits securely on the top of Suction Cups and
edges of the glass point toward the back side of the unit.
the glass shelf must go from the top of the suction cups, this can prevent the suction cups
stop the glass sliding. If glass is scratched you can minimize the damage by using a BLACK
marker and filling in scratched area from underneath.
Please call for replacement parts or assistance:
VAS Furniture Mfg. Inc.
Assembly Instructions
Parts Provided
(1) - Suction Cup
.
Sketch
1-866-942-5362
Factory No. 33-10944
Model # AVC9001GB
that the cut
When you sliding the shelf in,
Qty
(22)
Page 7
Advertisement
