Advertisement
Note: Please do not fully tighten all bolts until you finish assembling all parts, then go back and
fully tighten all bolts, this will make it easier during assembly of unit.
1. Unpack the unit and confirm that you have all the hardware and parts required.
2. Locate Back Panel (D) and set back face down on a non-abrasive surface as shown in detail
#1.
3. Align and attach three Shelf Frames (A, B & C) onto the Back Panel (D) using the 1 1/4"
Bolts (1) with Washers (4 & 5) through the back rail holes into the threaded inserts on Back
Panel. Make sure the metal tabs for suction on Shelf Frame are up. Fasten all bolts with
Allen Wrench provided. See detail #1.
4. Attach two Floor Levelers (6) to the bottom threaded inserts on the Bottom Shelf Frame (C)
for the necessary adjustment, as shown in detail #1.
(3)- 1 1/4" Bolt
Description:
Sketch
Qty.
Tools Required: Allen Wrench
Please call for replacement parts or assistance:
VAS Furniture Mfg. Inc.
Assembly Instructions
Required hardware in this step
(4)- Lock Washer
(7pcs)
(7pcs)
(5)- Flat Washer
(7pcs)
1-866-942-5362
Factory No. 33-10944
Model # AVC9001GB
(6)- Floor Leveler
(2pcs)
Page 4
Advertisement
