Sony DSC-RX100 How To Use Manual page 105

[115] How to Use
Playing back images
Plays back the recorded images.
1. Press the
2. Select the image with the control wheel.
Hint
You can rotate the image by pressing the Fn (Function) button. Press the Fn (Function)
button and then the center button to rotate the image counter-clockwise. The image
rotates each time you press the center. Once you have rotated an image, it remains
rotated even after the product is turned off.
The product creates an image database file on a memory card to record and play back
images. An image that is not registered in the image database file may not be played
back correctly. To play back images shot using other devices, register those images to
the image database file using MENU → [Setup] → [Recover Image DB].
Note
You cannot rotate the movies.
You may not be able to rotate images shot using other products.
When viewing rotated images on a computer, the images may be displayed in their
original orientation depending on the software.
[116] How to Use
Playback zoom
Enlarges the image being played back.
1. Display the image you want to enlarge, and slide the W/T (zoom) lever to the T side.
Slide the W/T (zoom) lever to the W side to adjust the zoom scale.
2. Select the portion you want to enlarge by pressing the top/bottom/right/left side of the
control wheel.
3. Press the MENU button, or the center of the control wheel to exit the playback zoom.
Viewing Viewing still images
(Playback) button to switch to the playback mode.
Viewing Viewing still images