Configuration; Default Ip Address; Web Interface; First Access To The Web - Videotec MAXIMUS MVX DELUX Instruction Manual

High-spec ex-proof hd camera in a compact design
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1

6 Configuration

6.1 Default IP address

The unit is configured to obtain an IP
address from a DHCP server.
The IP address acquired via DHCP is visible in the
DHCP server log file.
If the DHCP server is not available, the unit
automatically configures itself with a self-generated
IP address in the 169.254.x.x/16 subnet. Configuring
the IP address of the PC as belonging to the same
subnet (example: IP address: 169.254.1.1, subnet
mask: 255.255.0.0).
Use an ONVIF compatible VMS or a network sniffer to
find the IP address of the device (IP scan utility).

6.2 Web interface

Browsers supported: Microsoft Internet
Explorer, Microsoft Edge, Google Chrome,
Mozilla Firefox.
6.2.1 First access to the web pages
The first operation in configuring the device consists
in connecting to the web interface.
To access the web interface of the product, simply
use a browser to connect to http:/ ip_address.

7 Accessories

A series of accessories for the device in use
is available. Refer to the HANDBOOK A for
relative descriptions.
8
8 Instructions for normal
operation

8.1 Enabling the wiper (Wiper)

Do not use the wiper if the outside
temperature is below 0°C or in case of ice.
To activate/deactivate this function, refer to the
manual of the control device used or to the relative
chapter (8.3 Special controls, page 8).

8.2 Enabling the washer (Washer)

To activate/deactivate this function, refer to the
manual of the control device used or to the relative
chapter (8.3 Special controls, page 8).

8.3 Special controls

SPECIAL CONTROLS
Action
Command
Protocol
HTTP API1
Wiper Start
Save Preset 85
Wiper Stop
Save Preset 86
Washer
Save Preset 87
Night Mode On
Save Preset 88
Night Mode Off
Save Preset 89
Night Mode Auto
Reboot the device
Save Preset 94
Tab. 4
1 For further information please contact the VIDEOTEC
service center.
ONVIF (auxiliary
command)
tt:Wiper|On
tt:Wiper|Off
tt:Washing Proced
ure|On
tt:IRLamp|On
tt:IRLamp|Off
tt:IRLamp|Auto
MNVCMVXHDBCAM_1813_EN

Advertisement

Table of Contents
loading

Table of Contents