Assembly Instructions - In-Step Mobility U-Step 2 Walking Stabilizer Step-By-Step Manual

1) Open the box and take out the
U-Step 2 from the box.
2) Cut any plastic ties and remove
packing material used for protecting
the walker in shipping.
3) Release the locking clip.
4) Pull up the handle bars until the seat becomes perpendicular
to the ground.
5) djusting the Handlebars to the
proper height. Generally, the handle-
bars are adjusted so that the handles
are 2-3 inches above your palm when
your arm rests at your side.
a. Loosen the height adjustment
knobs on both the left and right
about two turns.
— 3 —
A. Assembly Instructions
(Below left)
Then, press the seat down until it
snaps into place.
(Below)