Weights - In-Step Mobility U-Step 2 Walking Stabilizer Step-By-Step Manual

— 10 —
When Sound Cueing is activated, both the sound and laser re-
main on indefinitely. Turning the Sound Cueing off requires shut-
ting the entire module off, by pressing the red button.
Installing and Replacing the Cueing Module Batteries —
Use either alkaline or lithium
"AA" batteries. Remove the
small screw holding the bat-
tery cover on (Figure 1) and
slide the cover to the left to
remove it. Note the position
of the two batteries (Figure
2), ensuring that the the "+"
and "–" sides are installed in
opposite directions. The unit
will click either three or five
times when the batteries are
installed correctly. If the unit
clicks three times, it is shut-
ting off. If the unit clicks five
times, it is turning on and the
power indicator will blink.
2) Weights —
Although the U-Step 2 is very stable, we do offer weights as an
accessory to increase the
stability of the walker.
These weights easily se-
cure to the base of
the U-Step 2 using
Velcro straps