US Robotics COURIER HST User'smanual page 87

COURIER HST
Cn
D
C0
C1
p
T
w
(a
R
Transmitter enabled/disabled.
Transmitter disabled; receive-only condition.
Transmitter enabled (Default).
Dial the number that follows and enter Originate Mode.
Optional parameters:
Pulse dial (Default).
Touch-Tone dial.
(Comma) Pause for 2 seconds.
Return to Command Mode after dialing.
Dial the letters that follow.
Transfer call (flash switch-hook).
Wait for second dial tone (with X3 or higher).
Wait for an answer (with X3 or higher).
Reverse frequencies.
DSn
Dial the phone number stored in NRAM at position n
(n
=
0-3).
En
Fn
Hn
C-2
E0
E1
Command Mode local echo (display) of keyboard commands
ON/OFF. (DIP switch 4 is factory set to Command Mode
echo ON.)
Local echo OFF.
Local echo ON .
Online local echo of transmitted data ON/OFF. Sometimes
referred to as the Duplex setting.
F0 Local echo ON. Sometimes called Half Duplex. Modem
sends a copy to your screen of data it sends to the re-
mote system.
F1 Local echo OFF (Default). Sometimes called Full
Duplex. Receiving system may send a remote echo of
data it receives.
H0
H1
On/off hook control.
Hang up (go on hook).
Go off hook.