US Robotics COURIER HST User'smanual page 109

COURIER HST
Front Panel
Indicators
Programmable
S-Registers
F-2
Switch
Functions
HS
AA
CD
OH
High Speed (9600 bps)
Auto Answer/ Answer
Carrier Detect
Off Hook
RD Receive Data
SD Send Data
TR Terminal Ready (DTR)
MR Modem Ready/Power
RS Request to Send
CS Clear to Send
ARQ HST/MNP connection established
AL Analog Loopback Self-Test
Values in parentheses are defaults:
Number of rings on which to answer (I)
ASCII character definitions, decimal: escape code (43),
Carriage Return (13), Line Feed (10), Backspace (8)
Timing: Wait before dialing (2 sec)
Carrier Detect wait (30 sec)
Pause in Dial, Repeat commands (2 sec)
Remote Carrier Detect before local recognition
(0.6 sec)
Disconnect at loss of carrier (0.7 sec)
Escape code guard time
(I
sec)
Touch-Tone duration, spacing (70 Ms)
Break length, to DTE (100 Ms)
Modem self-testing (0, Data Mode)
Inactivity Timer (0, disabled)
Externally accessible. Values in parentheses are factory
settings: UP
=
OFF (open), DOWN
=
ON (closed).
Volume control
DTR override (DOWN)
Result code mode (UP, verbal)
Result code display (DOWN, displayed)
Command Mode echo (UP, echo ON)
Auto Answer (DOWN, AA suppressed)
CD override (DOWN)
RJl l/RJl3 jack (UP, RJI I)
Smart/Dumb mode (DOWN, Smart)
Online Escape code with/without disconnect (DOWN, no
disconnect)
Load NRAM defaults/ROM factory settings (UP, NRAM)
RS-232C Modem/Terminal data interface (UP, normal
assignments of Pins 2 and 3)