Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for EUCHNER ESL-IH-AR
Summary of Contents for EUCHNER ESL-IH-AR
- Page 1 Operating Instructions Safety Systems with Locking ESL-IH-AR...
-
Page 2: Table Of Contents
Operating Instructions Safety Systems with Locking ESL-IH-AR Contents About this document ..................... 4 1.1. Scope ............................4 1.2. Target group ..........................4 1.3. Key to symbols ..........................4 1.4. Supplementary documents ......................4 Correct use ......................5 Description of the safety function ................6 Exclusion of liability and warranty ................. - Page 3 System status table .................... 22 Technical data ....................23 11.1. Technical data safety system ESL-IH-AR ..................23 11.1.1. Dimension drawing safety system ESL-IH-AR ..............24 Ordering information and accessories ..............25 Inspection and service ..................25 Service ......................25 Declaration of conformity ................... 26...
-
Page 4: About This Document
Safety Systems with Locking ESL-IH-AR 1. About this document 1.1. Scope These operating instructions are valid for all ESL-IH-AR. These operating instructions, the document “Safety Information and Maintenance” and any enclosed data sheet form the complete user information for your device. 1.2. Target group Design engineers and installation planners for safety devices on machines, as well as setup and servicing staff possessing special expertise in handling safety components. -
Page 5: Correct Use
The safety system ESL can only be combined with the intended modules in the ESL system family. On the modification of system components, EUCHNER provides no warranty for function. Several devices are only allowed to be connected in series using devices intended for series connection with the ESL. -
Page 6: Description Of The Safety Function
Prior to use, read the operating instructions and keep these in a safe place. Ensure the operating instructions are always available during mounting, setup and servicing. EUCHNER cannot provide any warranty in relation to the readability of the CD for the storage period required. For this reason you should archive a printed copy of the operating instructions. -
Page 7: Function
Operating Instructions Safety Systems with Locking ESL-IH-AR 6. Function The safety system ESL-AR monitors the position of movable safety guards. The safety outputs are switched on/off when the latch on the handle module is moved to/removed from the operating distance on the interlocking module. -
Page 8: Switching States
Operating Instructions Safety Systems with Locking ESL-IH-AR 6.3. Switching states The detailed switching states for your switch can be found in the system status table. All safety outputs, monitoring outputs and display LEDs are described there. Safety guard closed Safety guard open... -
Page 9: Mounting
Operating Instructions Safety Systems with Locking ESL-IH-AR 7. Mounting CAUTION Safety systems must not be bypassed (bridging of contacts), turned away, removed or otherwise rendered ineffective. Ì Observe EN ISO 14119:2013, section 7, for information about reducing the possibilities for by- passing an interlocking device. -
Page 10: Attachment To The Door Profile
Operating Instructions Safety Systems with Locking ESL-IH-AR 7.2. Attachment to the door profile With two-leaf hinged doors, one of the two door leaves additionally must be latched mechanically. 1. Fasten the ESL using 4 M6 screws and washers. Please note that the gap dimension between handle module and interlocking module is 0 - 3 mm; the max. vertical offset ¨... -
Page 11: Electrical Connection
8. Electrical connection The following connection options are available: Ì Separate operation Ì Series connection with Y-distributors or the passive distribution module AC-DP-…-SA-… from EUCHNER (only with M12 plug connector) Ì Series connection, e.g. with wiring in the control cabinet. Ì... -
Page 12: Notes About
Ì On the usage of other connection components, the requirements in the following table apply. EUCHNER provides no warranty for safe function in case of failure to comply with these require- ments. Observe the following requirements with respect to the connection cables:... -
Page 13: Maximum Cable Lengths
Operating Instructions Safety Systems with Locking ESL-IH-AR 8.5. Maximum cable lengths Switch chains are permitted up to a maximum overall cable length of 200 m taking into account the voltage drop as a result of the cable resistance (see table below with example data and case example). -
Page 14: Connector Assignment Safety System Esl-I-Ar
Operating Instructions Safety Systems with Locking ESL-IH-AR A safety relay is connected downstream which consumes 75 mA at each of the two safety inputs. This operates over the whole temperature range with a voltage of 19.2 V (corresponds to 24 V - 20%). -
Page 15: Connector Assignment Y-Distributor
Operating Instructions Safety Systems with Locking ESL-IH-AR 8.7. Connector assignment Y-distributor Connector assignment of inter- locking module ESL-I-AR (8-pin plug) and Y-distributor (8-pin socket) Function X1.1 FI1B X1.2 X1.3 FO1A X1.4 FO1B X1.5 X1.6 FI1A X1.7 0 V X1.8 Y-distributor with connecting... -
Page 16: Connection Of A Single Ar Device
The user is responsible for safe integration in the overall system. Detailed application examples can be found at www.euchner.de. Simply enter the order number in the search box. All available connection examples for the device can be found under “Downloads.”... -
Page 17: Connection Of Several Devices In A Switch Chain
The user is responsible for safe integration in the overall system. Detailed application examples can be found at www.euchner.de. Simply enter the order number in the search box. All available connection examples for the device can be found under “Downloads.”... -
Page 18: Information On Operation On An Ar Evaluation Unit
Ì Always connect inputs FI1A and FI1B directly to a power supply unit or to outputs FO1A and FO1B of another EUCHNER AR device (series connection). Pulsed signals must not be present at inputs FI1A and FI1B. -
Page 19: Setup
Operating Instructions Safety Systems with Locking ESL-IH-AR 9. Setup 9.1. LED indicators STATE DIA Color STATE green 9.2. Teach-in function for handle module (only for unicode evaluation) The handle module must be assigned to the interlocking module using a teach-in function before the system comprising interlocking module and handle module forms a functional unit. -
Page 20: Teach-In Function With Series Connection, Replacing And Teaching In Device
Operating Instructions Safety Systems with Locking ESL-IH-AR 9.2.2. Teach-in function with series connection, replacing and teaching in device It is recommended not to teach in the handle modules in the series connection but to teach them in one by one instead. -
Page 21: Functional Check
Operating Instructions Safety Systems with Locking ESL-IH-AR 9.3. Functional check WARNING Danger of fatal injury as a result of faults in installation and functional check. Ì Before carrying out the functional check, make sure that there are no persons in the danger area. -
Page 22: System Status Table
Operating Instructions Safety Systems with Locking ESL-IH-AR 10. System status table LED indicator, output Operating mode State 5 Hz Self-test Self-test after power up (10 s) closed Normal operation, door closed 1 x in- Normal operation, door closed, preceding device in the switch chain signals "door open" (only... -
Page 23: Technical Data
Operating Instructions Safety Systems with Locking ESL-IH-AR 11. Technical data NOTICE If a product data sheet is included with the product, the information on the data sheet applies in case of discrepancies with the operating instructions. 11.1. Technical data safety system ESL-IH-AR... -
Page 24: Dimension Drawing Safety System Esl-Ih-Ar
Operating Instructions Safety Systems with Locking ESL-IH-AR 11.1.1. Dimension drawing safety system ESL-IH-AR Possible profiles 30, 40, 45, 50 71,5 Red LED Maximum vertical offset between interlocking module and handle module ± 1 mm Green LED Interlocking module Handle module... -
Page 25: Ordering Information And Accessories
12. Ordering information and accessories Tip! Suitable accessories, e.g. cables or assembly material, can be found at www.euchner.de. To order, enter the order number of your item in the search box and open the item view. Accessories that can be combined with the item are listed under “Accessories”. -
Page 26: Declaration Of Conformity
Operating Instructions Safety Systems with Locking ESL-IH-AR 15. Declaration of conformity (translation of the original operating instructions) 119138-05-10/15... - Page 27 Operating Instructions Safety Systems with Locking ESL-IH-AR 119138-05-10/15 (translation of the original operating instructions)
- Page 28 Edition: 119138-05-10/15 Title: Operating Instructions Safety Systems with Locking ESL-IH-AR (translation of the original operating instructions) Copyright: © EUCHNER GmbH + Co. KG, 10/2015 Subject to technical modifications; no responsibility is accept- ed for the accuracy of this information.
Need help?
Do you have a question about the ESL-IH-AR and is the answer not in the manual?
Questions and answers