Table of Contents
Advertisement
INSTRUCTION MANUAL
4. Specification
Range:
Resolution:
Accuracy:
Sensor::
Display:
Nominal temperature:
Working temperature:
Atmospheric humidity:
Power supply:
Battery life time:
Low battery warning::
Dimensions of case:
Weight:
EMV:
Technical changes reserved
B+B 0141 0315-117 September 2010
-50 to +1150°C
1°C
<1% ±1 digit from -20 to +550°C and 920 to 1150°C, <1,5% ±1 digit from 550 to 920°C.
For more detailed values please refer to att. correction table.
NiCr-Ni, acc. to ½ DIN 43710 for plug-in operation (not included in scope of supply!)
approx. 13 mm high, 3½ digit LCD
25°C (accuracy specified at this temperature)
0 to 45°C, please avoid quick temperature changes, if possible, otherwise a temperature
adjustment time of approx. 15 minutes has to be taken into account.
0 to 80 % r.F. (not condensing)
9V-battery type IEC 6F22 (included) as well as additional d.c. connector (internal pin Ø
1.9mm) for external 10-12V direct voltage supply. (suitable power supply: GNG10/3000)
approx. 700 operating hours
„BAT" displayed automatically in case of low battery
approx. 142 x 71 x 26 mm (H x W x D), Impact-resistant ABS plastic housing, Front side
IP65, integrated pop-up clip for table top or suspended use.
approx. 160g (cpl. device with battery)
The device corresponds to the essential protection ratings established in the Regulations of
the Council for the Approximation of Legislation for the member coutries regarding
electromagnetic compatibility (89/336/EWG). Additional error: <1%
B+B Thermo-Technik GmbH | Heinrich-Hertz-Straße 4 | D-78166 Donaueschingen
Fon +49 771 83160 | Fax +49 771 831650 | info@bb-sensors.com | bb-sensors.com
10 / 12
Advertisement
Table of Contents
