3-2-2
Rail Width Adjustment
The rail width of front and rear transfer conveyors and board holder are automatically adjusted.
SERVO
OFF (
To the next page
193C-E-EMA03-A01-00
) ON (
)
Positioning and Lift Transfer Rail Width Adjustment
1.
Turn on the servo switch.
2.
Press
Machine
adjust
• The machine adjustment menu screen ap-
pears.
UNLOCK
3.
Press
• Each station starts to return to their origin.
∗ If the power is turned off, turn on the power
after that operation is displayed.
.
+ Return to origin .
Page 3-7
3