Improved Operation; Automatic Printing Condition Setting (For Each Type Of Solder) - Panasonic KXF-193C Operating Manual

Characteristics of Machine
1-1-5

Improved Operation

The adoption of the LCD color touch panel on the operating part offers very clear vision. Also it
makes easy to exchange Japanese and English.
Tree jump function
Layered operation
Using the data creating unit PT100 enables to create data even during running the machine.
It is possible to create all data of PT100 support models all together.
193C-051E
The system for data creation
1-1-6

Automatic Printing Condition Setting (for Each Type of Solder)

As there are various characteristics for each type of solder, it needs skills and takes much time to
set the printing condition of the machine for each solder.
The printing condition is set for each solder in SP22P-M, and even the operator without much skill
can easily create data by loading prepared data all together.
6 patterns are available for each type of solder as our standard library.
Besides, 14 patterns can be added as for the user's creation.
PrintCondition
File(F) @ Help(H)
PrintCondition
Squeegee
Speed (mm/s)
PrintScope
Clearance (mm) DWSpeed (mm/s) DWStroke (mm) ChangeLeaveSpeed
Lift
Return to LibData
193C-052E
Page 1-4
The specified screen appears on any screen by using this, saving time.
The improper operation is reduced to a minimum by classifying the operating screens into
each mode for the operator and engineer.
PT100
CleaningData PrintCounter
PriorityAfterPrint
MotionMode
Single Lift
¥ ¥
Pressure (g/mm) Length (mm) Kind
e 100 e 0.000 350.000 FlatSq
q 50 q
0.000
Offset F (mm) Offset R (mm)
{ Direction [ Direction
30.000 30.000
0.500 5.0 2.00
Reflect to LibData
High-speed screen printer
High-speed adhesive dispenser BD30S-M
High-speed chip mounter
Multi-functional chip mounter
Angle (default)
¥ 60
Mask
-
+
¥
Const
´ ¶ Ø
PT100 support models
Read from Library
PatternLibrary @ @ @ @ @ @ @ @ ¥
PrintCondition CleaningData PrintCounter
MotionMode PriorityAfterPrint
Squeegee
Single Lift
Speed (mm/s) Pressure (g/mm) Length (mm)
e 100 e 0 350
q q
50 0
Offset F (mm) Offset R (mm)
{ Direction [ Direction
PrintScope
30 30
Clearance (mm) DWSpeed (mm/s) DWStroke (mm) ChangeLeaveSpeed
Lift
0.5 5 2
Previous Next
193C-E-EMA01-A01-00
SP22P-M
CM88C-M
CM100-M
Reference
Kind Angle (default)
FlatSq 60
Mask
-
+
Const
OK Cancel