Programming Capabilities - Code 3 Sprinter Installation & Operation Manual

(Pass Code must be entered to make certain program adjustments)
(Pass Code located on page 21. Remove page before giving manual to end user)
Item: Label:
1. Setting light switch functions
2. Selecting different siren Wail/Yelp tones
3. Selecting different 2nd siren tones
4. Selecting different Manual siren tones
5. Programming the EMERGENCY key functions
PRESS ALT,
THEN
PROGRAM
Chart 1: Euro Tone Programming Reference
Multiplier for Steps A- D
for Euro Tone Prgramming
Secondary (SEC) OFF
Repeat (
Secondary (SEC) ON
Repeat (
Multiplier
Backlighting
Secondary (SEC) ON
Repeat (
Secondary (SEC) ON
Repeat (
T56095 Rev. A

PROGRAMMING CAPABILITIES:

Operation:
FEATURES THAT ARE PROGRAMMABLE:
Enters the program mode
of the control head.
(Pressing CLEAR while in the programming mode
will exit programming without saving any
changes made during the programming session.)
No
Lights
German
▲
) OFF Town
UK
▲
) OFF Wail
Austria
▲
) OFF Police
Swedan
▲
) ON HiLo
Activation:
ALT & PROGRAM
keys will turn off and
(PRIMARY, SEC,
,
light keys will light up
Indicator light in yellow bargraph area of control head
1st 2nd 3rd
Light Light Light
German French French
Country Ambulance UMH
UK UK UK
Yelp HiLo Pulsar
Austria Austria Austria
Fire Ambulance DIN
Swedan Finnish Finnish
Yelp HiLo Yelp
Description:
(If the Passcode is
not entered within
5 seconds, the unit
, ) will return to the
idle condition)
Once the 4 digit
code is entered, the
controller will beep
and the ALT &
PROGRAM keys
will be lighted.
4th 5th
Light Light
French French
Police Gendarmerie
UK Swiss
Airhorn HiLo
Norway Norway
Wail Yelp
Italy Italy
Police Fire & Amb.
6th
Light
French
Pompiers
Dutch
Two Tone
Martin
Horn
Belgium
NB159
Page 13 of 22