Icom IC-M36 Instruction Manual page 25

D Auto scan function
The auto scan function starts normal or priority scan auto-
matically when no signal is received, and no operation is
performed for 30 seconds.
Push
Auto scan OFF (default)
D Dual/Tri-watch function
This item can be set as Dualwatch or Tri-watch. (p. 16)
Push
Dualwatch function
(default)
D Monitor key action
The monitor key opens the squelch temporarily. This item sets
the key action.
• Pu (PUSH) : The monitor function is activated by holding down
[VOL/SQL MONI] for 1 second. The squelch opens
while holding down the key.
• Ho (HOLD) : The monitor function is activated by holding down
[VOL/SQL MONI] for 1 second. The squelch stays
open until any key is pushed.
"AS"
Push setting (default)
D Automatic backlighting
This function is convenient for night-time operation. The
backlight can be selected from ON and OFF.
Auto scan ON
• The backlight is automatically activated when any key except for
[PTT] is pushed.
"dt"
• The backlight is automatically turned OFF after 5 seconds of inac-
tivity.
Tri-watch function
Auto backlighting ON
"Sq"
D LCD contrast setting
Set the LCD contrast level from High contrast and Low con-
trast.
The LCD contrast level makes no difference for indoor use.
High contrast (default)
Push
Push
(default)
Push
7
SET MODE
1
2
3
Hold setting
4
"bL"
5
6
7
8
9
10
11
12
Auto backlighting OFF
13
"LC"
14
15
16
Low contrast
19