Manual Operations; Manual Station Operations; True Manual Operation; Timed Manual Operation - Toro TMC-424E User Manual

Manual Operations

The TMC-424E offers several manual operation methods. A separate Function Dial position is
provided for Manual Station and Manual Program
NOTE: All program control options selected within Special Functions will also apply to all manual
control operations.

Manual Station Operations

The TMC-424E offers two ways to manually activate individual stations: True manual, to operate a
selected station without a specified run time, and Timed manual to operate selected stations with
an assigned temporary run time.

• True Manual Operation

1. Turn the Function Dial to Manual Station
2. Press the button as needed to select the station number.
3. Press the button to turn on the station. ON will be displayed with the icon.
NOTE: The station will run continuously until a navigation button is pressed or the Function
Dial is turned. The station will turn off automatically at Midnight.
IMPORTANT: Flow thresholds do not apply during True Manual and Timed Manual
operations.

• Timed Manual Operation

1. Turn the Function Dial to Manual Station
2. Press the button to select the station number.
3. Press the or
4. To select additional stations, repeat steps 2 and 3.
5. When station selections have been made, turn the Function Dial to RUN
• The operating station number(s), remaining station run time and the
begin alternating with the current time of day.
• The stations will operate in the order selected, either sequentially or concurrently as deter-
mined by the Stack/Overlap option selection.
• Automatic mode will resume when the manual operation has been completed.
• To advance through the station sequence, press the
• To terminate manual operation at any time, turn the Function Dial to OFF
When the display stops flashing, turn the dial to RUN
14
buttons to select a manual run time (1 minute – 8 hours).
operations
.
.
button.
.
.
icon (flashing) will
.