5. ASSEMBLY AND DISASSEMBLY
5-1. TOOLS FOR DISASSEMBLY AND ASSEMBLY
NO.
TOOL
Box driver
1
Double-ended
spanner
2
3
Vice pliers
4
Other(Driver, Nipper, Long nose)
5
JIG for the Tub
10mm
Heater (1)
13mm
Motor (1), Balance (5), 2 holes of each left and right of the
19mm
shock absorber 1 Pulley hole
10, 13,19mm
Replaceable for the box driver.
Since the bolt runs idle when the box driver is used, use the
box driver 17mm.
Tool to protect the idle and abrasion of the bolt for the
box driver.
General tools for the after service.
1 (Disassemble and Assemble)
5-1