Main Function; Child Lock; How It Works - Samsung MAYTAG WF316L Service Manual

3-3. MAIN FUNCTION

CHILD LOCK

A function that prevents children from playing with your Washer.
If you want to activate/deactivate the Child Lock function, press the Soil Level and Signal buttons at the same time for 3
seconds.

How It Works:

1. Child Lock can be activated while your Washer is running.
2. Once you activate Child Lock, all controls (except for the Power button) will be locked until you deactivate Child Lock.
3. The Child Lock button will be lit while it is in effect.
Note: When buttons, other than the Power button, do not respond, please check if the Child Lock
button is on.
GARMENT +
You can add or take laundry items even after the wash has started, as long as the Garment+ light is on. Pushing the Start/
Pause button unlocks the door, unless the water is too hot or if there is too much water in your Washer. If you are able to unlock
the door and wish to continue the wash cycle, close the door and press the Start/Pause button.
MY CYCLE
Allows you to activate your custom wash (temperature, spin, soil level, etc.) with one–button convenience.
By pushing the My Cycle button, you activate the settings used during the last My Cycle mode. The My Cycle light will indicate
activation.
You can select all options as follows in My Cycle mode.
1. Select cycle using Cycle Selector dial.
2. After cycle selection,set each option.
Note:
At this time, the option will follow as per each cycle's default option selection.
Then you can start My Cycle by pushing the Start/Pause button in My Cycle mode.
The cycle and options you select will be displayed next time you choose My Cycle.
3-5
ACTIVATING/DEACTIVATING