Convenient Functions; Method Of Connection - Samsung SVR-24JP Installation And Operating Instructions Manual

CONVENIENT FUNCTIONS

Understanding the following functions will give you a convenient way of finding information.
Connecting Operating
method method
Set the A.MEMO display using
When you want to quickly
view the picture from the the CNT. MEMO button.
location of the alarm Then, turn the shuttle ring to
recording. rewind.
Press the MENU button in stop
When you want to know
the alarm recorded time mode.
and day quickly. Select the ALARM RECALL
using the SHIFT
button.
When you want to know When pressing the COUNT
the numbers of alarm button once, the alarm counter is
recordings. indicated on the display.
Example) A-11
Connect the trigger output of the
When you want to switch
over the camera input of outside equipment.
outside equipment Refer to the connecting methods
automatically (using the (page 36) Record in the Time
Lapse mode.
trigger function).
When you want to view the Press the TIME MODE button to
high speed picture set it in the "L3H*" mode. Then
recorded in the time lapse press the PLAY button.
mode.
[If recorded in the
L8H~960H (L8H~L24H)*
mode]
35
Description of
operation
The position of the alarm recording is
located and the VCR enters pause mode for
5 seconds. The tape is playedback when
pressing the PLAY button. When there is no
button entry within 5 seconds, the tape is
stopped automatically. (It is possible with the
tape recorded at L3H mode.)
The monitor screen shows the following.
ALARM RECALL
❿ ❿
❷ ❷ ! and
YEAR DATE TIME
1 2001 12/25 19:00:00
2 2001 12/25 17:00:00
3 2001 12/25 15:00:00
4 2001 12/25 13:00:00
5 2001 12/25 12:00:00
6
END:MENU
The numerals of the alarm counter indicate
the times of alarm recording. It is possible up
to 99. A-11 (It indicates that the alarm
recording is mode 11 times.)
This VCR records the input of each camera
frame by frame, field by field and then
switches.

METHOD OF CONNECTION

Connection with Frame Switcher
ALARM IN
GND
TRIGGER OUT
1 ALARM IN 2 ALARM OUT 3 ALARM RESET 4 ERROR OUT 5 TRIGGER OUT
6 TAPE END OUT 7 SERIES OUT 8 GND 9 SERIES IN 10 1 SHOT RECIN
1 1 2 2 3 3 4 4 5 5 6 6 7 7 8 8 9 9 10 10
1 2
IN
IN OUT
CAMERA
OUT
AUDIO
VIDEO
(Rear of SVR-24JP/
VIDEO OUT
SVR-960JP)
VIDEO IN
• Refer to the owner's manual Frame
switcher for detailed information.
• R/T: REC TRIGGER IN
• A/O: ALARM OUT
1
2
(Camera)
8
2 3 4 5 6 7 8 R/T A/O
8
PB REC MONITOR
IN OUT OUT GND
VCR
FRAME SWITCHER FS-81MA
Video input
from monitor
• When connecting with Frame switcher, it is
convenient, if the ALARM DURATION is
placed in "AUTO" position.
• You do not have to connect the ALARM
OUT, ALARM RESET input of the video.
36