Table of Contents
Advertisement
Operation Instruction
Operation Explain
Page size ： 16k （ 18.4 × 26cm ）
1. Turn on the Fan: Press the "Fan Power
Then the fan runs at the speed 3. The display screen displays
3
. After the fan is turned on, press the "
Then the fan speed changes to4, 1, 2,3circularly. (Note: The
number displayed on the screen at this time is a single digit
that indicates the fan speed.)
At this time when the fan is working, the automatic ventilation
cannot be enabled by pressing the "
2. Lamp Control: Press the " Light
Then the luminance of the lamp increases until it reaches the
maximum state within 1.5 seconds. If you hold down the Light
button for more than 1 second, the luminance of the lamp
changes circularly. After you release the Light button, the
luminance of the lamp remains in the state of the moment
when you release the button. Press the Light button once
again, the luminance of the lamp decreases until the lamp is
turned off.
3. Auto Clean: After your cooker hood has been used for a
period, the screen displays the
continuously. It indicates that the oil is too much on the cooker
hood and the auto clean function should be enabled. You
should turn off all the other switches (except the Light button).
Then, press the "Auto Clean
clean function.
" for the first time.
"button.
" button.
" button for the first time.
icon, which blinks
" button to enable the auto
6
Advertisement
Table of Contents
