Way Huge Red Llama WHE-206 Instruction Manual

POWER
The Red Llama™ Overdrive is powered by a single 9-volt battery, a
9-volt AC adapter such as the Dunlop ECB003, or the DC Brick
and Iso-Brick power supplies. The power input is a 5.5mm x 2.1mm
™
jack with the positive voltage on the outer sleeve. Using an external
power supply will disconnect the battery. Disconnect the input jack
to preserve battery life when not in use. The pedal will lock into
bypass mode when it is time to change the battery. It also includes
power protection circuitr y to prevent damage from AC power
supplies.

SPECIFICATIONS

INPUT IMPEDANCE..................................................................100 kΩ
OUTPUT IMPEDANCE.............................................................< 10 kΩ
NOISE FLOOR........................................................................-75 dBV
BYPASS..............................................................True Hardwire Relay
CURRENT DRAW........................................................................5 mA
POWER SUPPLY................................................................ 9 volts DC
All measurements made with controls at center.
Noise measurements are A-weighted.
™
206
WHE-
Red Llama
™
instruction manual