Connectivity - Sagem OT860RF User Manual

Connectivity

You can swap various types of data with other devices (PC, mobile phones, PDAs, printers, etc.): images, sound, photos,
videos, Todo tasks, Organizer, contacts, etc.
Data exchange can be done using:
- a USB cable,
®
- a Bluetooth connection.
Wi-Fi
Your phone can connect to a wireless LAN (Wi-Fi). Once the Wi-Fi connection has been activated and your phone is in the
Wi-Fi network coverage area, incoming and outgoing communications (calls, messages, WAP) use the Wi-Fi LAN (and not
the GSM or GPRS network directly) with no intervention by you and in a transparent way for users.
WARNING
To avoid any risk of the Wi-Fi connection being cut-off, make sure that the Wi-Fi access point is not obstructed in any
way.
You can select the Wi-Fi mode is Off or ON by pressing Wi-Fi/Mode. By default, your phone is configured with the Wi-Fi
connection activated.
The Wi-Fi icon appears at the bottom of the idle screen.
For the first use in Wi-Fi connection, you must first associate your mobile phone with your Wi-Fi access point.
- Select Wi-Fi.
- Press New Access Points. A list is displayed.
- Select the required access point and press the navigator.
1. If the selected access point does not have a security key, the association is done automatically.
2. If the access point selected has a security key (WEP, WPA or WPA2):
- Enter the security key of the Wi-Fi access point (key indicated on the Wi-Fi access point label) and validate.
Notes:
- Where appropriate, you can also change the name of the Wi-Fi access point by selecting My Favourites.
- Hidden Access Point: you can add the identifier of your access point manually (SSID) so that its name is not displayed
in the list.
Notes:
- You can store several access points (the one at your home, at your friend's, etc.). When you move near one of these
access points, your phone will be associated with it automatically and with no new action by you.
- The MAC address of your phone is shown on a label adhered under the battery. You can use it if you want to install a filter
on your access point (refer to the access point manual).
Settings
35