Radio - Kenwood KMM-BT525HD Instruction Manual

HD Radio™ tuner
(for
[TUNER SETTING]
[SEEK MODE] Selects the searching method for S / T buttons when pressed.
[AUTO1]: Automatically search for a station or channel. ; [AUTO2]: Search
for a preset station or channel. ; [MANUAL]: Manually search for a station
or channel.
[IF BAND] [AUTO]: Increases the tuner selectivity to reduce interference noises from
adjacent FM stations. (Stereo effect may be lost.) ; [WIDE]: Subjects to
interference noises from adjacent FM stations, but sound quality will not be
degraded and the stereo effect will remain.
[AUTO MEMORY] [YES]: Automatically starts memorizing 6 stations with good reception. ;
[NO]: Cancels.
• Selectable only if [NORMAL] is selected for [PRESET TYPE]. (Page 5)
[RECEIVE MODE] Sets the receive mode of the HD Radio receiver. [AUTO]: Automatically
tunes to analog broadcast when there is no digital broadcast. ;
[DIGITAL]: Tunes in to digital broadcast only. ; [ANALOG]: Tunes in to
analog broadcast only.
[CLOCK]
[TIME SYNC] [ON]: Synchronizes the unit's time to the Radio Broadcast Data System
station time. ; [OFF]: Cancels.
8
ENGLISH
/ )
Default: [XX]
(for

RADIO

/
• "ST" lights up when receiving an FM stereo broadcast with sufficient signal
strength.
• The unit switches to FM alarm automatically when receiving an alarm
signal from FM broadcast.
Search for a station
Press B SRC repeatedly to select RADIO.
1
2 Press BAND repeatedly (or press #FM+/
to select FM1/FM2/FM3/AM.
3 Press S / T (or press S / T (+) on the remote control) to
search for a station.
You can store up to 18 stations for FM and 6 stations for AM.
• To store a station: Press and hold one of the number buttons (1 to 6).
• To select a stored station: Press one of the number buttons (1 to 6) (or
press one of the number buttons (1 to 6) on the remote control).
Direct Access Tuning
(using the remote control)
1 Press DIRECT to enter Direct Access Tuning.
2 Press the number buttons to enter a station frequency.
Press ENT IW to search for a station.
3
• To cancel, press or DIRECT.
• If no operation is done for 10 seconds after step 2, Direct Access Tuning is
automatically canceled.
/ / /
)
AM– on the remote control)
*