Usb/Ipod/Android - Kenwood KMM-BT525HD Instruction Manual

USB/iPod/ANDROID

Selectable source:
• / : USB FRONT/USB REAR/
iPod FRONT/iPod REAR/ANDROID FRONT/ANDROID
REAR
• / /
/ : USB/iPod USB/
ANDROID
Start playback
The source changes automatically and playback starts.
USB input terminal
USB
CA-U1EX (max.: 500 mA)
(optional accessory)
iPod/iPhone
/ :
You can also
KCA-iP102/KCA-iP103
connect to the USB
(optional accessory)*1 or
cable from the rear
accessory of the iPod/iPhone*2
of the unit (USB
input terminal).
ANDROID*3
USB cable*2
(commercially available)
10
ENGLISH
/
To
Play back/pause
Reverse/Fast-forward*4
Select a file
Select a folder*5
Repeat play*4*6
Random play*4*6
*1 KCA-iP102: 30-pin type, KCA-iP103: Lightning type
*2 Do not leave the cable inside the car when not used.
*3 You can control Android device using the Android device itself via other media player application installed in the Android
device.
*4 Not applicable for ANDROID.
*5 This does not work for iPod/ANDROID.
*6 For iPod: Applicable only when [MODE OFF] is selected. (Page 11)
On the faceplate
Press 6 IW.
Press and hold S / T.
Press S / T.
Press 2 / 1 .
Press 4 repeatedly.
[FILE REPEAT]/[FOLDER REPEAT]/[ALL REPEAT] : MP3/WMA/AAC/WAV/
[FILE REPEAT]/[FOLDER REPEAT]/[REPEAT OFF] : iPod
Press 3 repeatedly.
[FOLDER RANDOM]/[RANDOM OFF] : MP3/WMA/AAC/WAV/FLAC file or
Press and hold 3 to select [ALL RANDOM].
On the remote control
Press ENT IW.
Press and hold S / T (+).
Press S / T (+).
Press #FM+/ AM–.
FLAC file
iPod