Lindy 38151 User Manual page 4

Introduction
Thank you for purchasing the LINDY 4 Port HDMI 4K PiP (Picture in Picture) switch with remote control. This high
performance HDMI Switch allows any of the attached four sources to be shown on a UHD display while at the push
of a button you can also view the other channels with Picture in Picture. An Infra-red remote control is supplied to
make switching between sources and displays easier.
Package Contents

4 Port HDMI 4K PiP Switch

5V DC 1A Multi Country PSU

Remote control including battery

This manual
Features

Supports display resolutions up to 4Kx2K@30Hz,1080P@120Hz,and 1080P 3D@60Hz

Supports PiP (Picture in Picture) 1 main picture, 3 sub pictures

3D video support including Frame Packing for all 3D formats up to a 297MHz TMDS clock

Supports up to 48 Bit per pixel colour depths

HDCP 1.4 support (INPUT), HDCP v1.4a protocol compliant (OUTPUT)

Supports the reception of any audio data conforming to the HDMI specification 1.4 such as LPCM at up to
192kHz,compressed audio(IEC 61937),DSD,DST,DTS and HBR

Full colorimetric including sYCC601, Adobe RGB, Adobe YCC601,xvYCC extended gamut colour
Specification

Input Ports: 4 x HDMI Female

Output Ports: 1 x HDMI Female

Power Supply: 5V DC 1A

Dimensions: 117 x 65 x 25mm (WxDxH)

Weight: 120g

Operating Temperature: 0°C ~ 40°C / 32°F ~ 104°F

Storage Temperature: -20°C ~ 60°C / -4°F ~ 140°F

Relative Humidity: 20 ~ 90% RH (Non-condensing)

Power Consumption: 1W Max
Operation
Front Panel
1. POWER LED: The LED will illuminate red when connected to a live power source
2. SWITCH: Press the button to toggle through the inputs
3. IR RECEIVER: Point your remote at this sensor to switch channels
4. OUTPUT LED: The LED will illuminate when a HDMI cable is connected to a display
5. INPUT LED: The LED will illuminate red when the switch has detected a signal and illuminate green when
the input is selected