Specifications; Service Tools - Stanley GD50 User Manual

Capacity (Rod Anvil)
1/2 to 5/8 inch/12 to 16 mm diameter rod (model GD50132RF)
3/4 to 1 inch/19 to 25 mm diameter rod (model GD50133RF)
Pressure Range.............................................................................................................. 1500–2000 psi/105–140 bar
Maximum Back Pressure...................................................................................................................... 250 psi/17 bar
Flow Range ................................................................................................................................ 7–9 gpm/26–34 lpm
Couplers .........................................................................................HTMA/EHTMA Flush Face Type Male & Female
Hose Whips ........................................................................................................................................................... Yes
Weight .................................................................................................................................................57.3 lbs./26 kg
Overall Length .............................................................................................................................25.5 inches/64.8 cm
Overall Width ..................................................................................................................................10 inches/25.4 cm
Maximum Fluid Temperature .................................................................................................................. 140 °F/60 °C

SERVICE TOOLS

DESCRIPTION
O-ring Tool Kit: General Service of Seals ..........................................................................................................04337
Split Rings: Used with 04910.............................................................................................................................04908
Flow Sleeve Removal Tool ................................................................................................................................04919
Flow Sleeve Removal Tube: Used with 04908 & 05508....................................................................................04910
Bearing Puller Kit: General Bearing Pulling .......................................................................................................05064
Accumulator Disassembly Tool: Used with 04910 .............................................................................................05508
Tamper Sleeve Tool: Used to Pull Porting Block from Valve Block .................................................................... 01120
Accumulator Cylinder Puller: An Aluminum Disk (handy for protecting parts when using an arbor press ......... 05640

SPECIFICATIONS

PART NUMBER
GD50 User Manual ◄ 15