Performing A Hotsync Operation Via A Network - Samsung SPH-I330 Online User's Manual

Select the desired changed information from the choices listed in the
6.
dialog box.
Choose the duration of the setting.
7.
To have the setting affect only the next HotSync operation, deselect
Set as Default
To have the setting remain permanently, click the
setting.
Click
8. Done

Performing a HotSync Operation via a Network

When you use the Network HotSync software, you can take advantage of
the LAN and WAN connectivity available in many office environments.
The Network HotSync software allows you to perform a HotSync
operation by dialing in to a network or by using a cradle that is
connected to any computer on your LAN or WAN (provided that the
computer connected to the cradle also has the Network HotSync software
installed, your computer is on, and the HotSync Manager is running).
The Network HotSync software requires the following:
Your computer has TCP/IP support installed.
Both your company's network system and its remote access server
support TCP/IP. (Your system administrator has this information.)
You have a remote access account. (If you don't have an account,
consult your system administrator.)
Everything you need to connect to your company's dial-in server
(network modem) is included with Palm Desktop software and your
phone software. You need to activate the feature, however, on both Palm
Desktop software and your phone.
Performing a Network HotSync Operation
Click the HotSync Manager icon in the Windows task bar to open the
1.
HotSync Manager.
From the HotSync Manager menu, click
2.
From the HotSync Manager menu, click
3.
Click the
4. Network
mark is placed next to the user name.
.
to activate the settings.
tab. Click on the user name to select. A check
Section 2: Understanding Your Phone
Set as Default
.
Network
.
Setup
2Q: Advanced HotSync 156