Checking Memory Usage; Beaming Capabilities - Samsung SPH-I330 Online User's Manual

Checking Memory Usage

Your phone is equipped with 8Mb of total memory. When you install an
application on the handheld computer portion of the phone, the memory
is reduced to accommodate. If too many applications are installed, the
memory may become completely full. To monitor the amount of free or
available memory, you can display the memory information screen. The
memory information screen displays a list of applications with the
amount of memory they are using. You can also display the version of
the software application and number of records associated in the
memory information screen.
To check the memory usage:
Tap the Applications Launcher
1.
Tap the Menu Launcher
2.
Select
3. App
The memory information screen is displayed.
4.
Tap the
5. Version
information associated with each application.

Beaming Capabilities

Your phone has an IR (Infrared) port built in to the top of the unit. The
IR port is used to beam or transfer information from one device to
another. You can beam the following information between the two
devices:
The record currently displayed in Date Book, Address Book, To Do
List, or Memo Pad.
All records of the category currently displayed in Address Book, To Do
List, or Memo Pad.
A special Address Book record designated as your business card.
Note:
You can also perform a HotSync operation using the IR port.
An application installed in RAM.
To Beam a Record, Business Card, or Category
Locate the record, business card, or category you want to beam.
1.
and tap
Info
or
Records
Section 2: Understanding Your Phone
2P: Managing Handheld Computer Software 146
.
.
box to display the version and record