Table of Contents
Advertisement
u440 BMC Guide.book Page 104 Wednesday, October 8, 2008 10:17 AM
Changing the Lock Code
To change your lock code:
1. Press
MENU
for Menu.
OK
2. Select Settings > More....
3. Select Security.
4. Enter your lock code.
5. Select Change Lock.
6. Enter your new lock code and press the left softkey
new lock code must have 4 digits.
7. Re-enter your new lock code and press the left softkey
Calling in Lock Mode
You can place calls to 911 and to your special numbers when in lock mode.
To place an outgoing call in lock mode:
•
To call an emergency number or special number, enter the phone number
and press
•
To place normal outgoing calls, press
Enter your lock code. Enter the desired phone number and press
Locking/Unlocking Your Camera
When your camera is locked, you must enter your lock code before taking any
pictures or viewing stored pictures.
To lock/unlock your phone:
1. Press
MENU
for Menu.
OK
2. Select Settings > More....
3. Select Restrict and Lock.
4. Select Camera/Pictures.
5. Enter your lock code.
6. Using the navigation key, select On or Off, and press
Restricting Voice Calls
You can restrict your incoming and outgoing calls to Allow all, Contacts only, or
Special# only.
104 Phone Security
.
MENU
OK
for Next. Your
for Done.
to display the lock code screen.
MENU
.
OK
.
Advertisement
Table of Contents
