Install The Front Plate - Kallista P23083-CR Installation Instructions Manual

INSTALLATION INSTRUCTIONS
 Ensure the valve stem adapter is fi rmly pressed onto the valve stem.
 Secure the valve stem adapter to the valve with the correct length screw, as selected in the "Install the
Valve Stem Adapter" section of this guide.
 Align the holes on the front plate assembly and the valve.
NOTE: Be sure to select the correct length screw for your application.
 Attach the two screws through the front plate assembly and into the valve. Do not overtighten.
 Visually inspect the front plate assembly to ensure the foam seal is completely covering the wall opening. If
not, stop the installation and repair the wall opening.
1091608-2-G
5 of 6

3. INSTALL THE FRONT PLATE

Screw
Valve Stem
Adapter
3-way Transfer Valve Trim
Questions? Problems? For additional assistance, please contact KALLISTA's Customer
Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
Verify the seal covers
the wall opening.
Screw