The appearance of your product may differ from what is shown in these instructions, however, the installation procedure is the same. KALLISTA reserves the right to make revisions in the design of products without notice, as specifi ed in the Price Book.
Page 3
Set the valve stem adapter over the spline adapter. Do not completely press or screw the valve stem adapter into place until instructed to do so. 1091608-2-G Questions? Problems? For additional assistance, please contact KALLISTA’s Customer 3 of 6 Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
Page 4
Reinstall the handle assembly and the valve stem adapter. Check the alignment. Repeat until the handle alignment is satisfactory. 1091608-2-G Questions? Problems? For additional assistance, please contact KALLISTA’s Customer 4 of 6 Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
Visually inspect the front plate assembly to ensure the foam seal is completely covering the wall opening. If not, stop the installation and repair the wall opening. 1091608-2-G Questions? Problems? For additional assistance, please contact KALLISTA’s Customer 5 of 6 Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
Page 6
Tighten the setscrew with a hex wrench. Make sure the handle assembly is tight against the escutcheon. 1091608-2-G Questions? Problems? For additional assistance, please contact KALLISTA’s Customer 6 of 6 Service Department at 1-888-4-KALLISTA (1-888-452-5547) or kallista.com.
This manual is also suitable for:
P23083-lvP23283-rkP23283-lvP23183-lvP24183-crP24183-lv...
Show all