Control Board - Hoshizaki KMS-1401MLJ Service Manual

Modular crescent cuber serenity series including condensing unit models srk-14j/3

Hide thumbs Also See for KMS-1401MLJ:

Table of Contents

C. Control Board

• A Hoshizaki exclusive control board is employed in the Hoshizaki icemakers.

• All models are pretested and factory adjusted.

• For a control board check procedure, see "IV.B. Control Board Check."

• Fragile, handle very carefully.

• The control board contains integrated circuits, which are susceptible to failure

due to static discharge. It is especially important to touch the metal part of the

icemaker when handling or replacing the control board.

• Do not touch the electronic devices on the control board or the back of the control

board.

• Do not change wiring and connections. Do not misconnect terminals.

• Do not short out power supply to test for voltage.

• Always replace the whole control board assembly if it goes bad.

NOTICE

Table of Contents