Basic Picture Settings; File Format; Image Properties; Jpg Resolution - Leica M10-D Instruction Manual

BASIC PICTURE SETTINGS

EN

FILE FORMAT

Choose the JPG format
(= digital negative). These can be used individually or simultaneously.
Factory setting:
DNG
Setting via app only.
JPG
Notes
• The standardized DNG (Digital Negative) format is generally used
for the storage of raw data.
• The resolution setting for the
section), i.e. the two files may have differing resolutions if
picture data is saved in
• The number of remaining exposures shown in the viewfinder/
EVF panel may not necessarily change after every picture taken.
A counter change depends on the subject; very fine image
structures result in higher data quantities, while homogeneous
surfaces mean less data.
38
or the standardized raw data format
JPG
format is used (see next
JPG
and in format simultaneously.
DNG JPG

IMAGE PROPERTIES

JPG RESOLUTION

(Setting via app only)
DNG
The format setting offers 3 image resolution (number of pixels)
JPG
options. (24 MP),
L-JPG
megapixel). You can therefore adjust your settings to the intended
use and available memory card capacity.
Note
The format always uses the highest resolution (24 MP), no
DNG
matter what setting is selected.
JPG
(12 MP) and (6 MP) (MP =
M-JPG S-JPG