Automatic Time Via Gps; Auto Power Saving (Standby Mode) - Leica M10-D Instruction Manual

AUTOMATIC TIME VIA GPS

(Setting via app only)
Note
• is available only if the GPS function is set to ON
Auto GPS Time
when Visoflex is used.

AUTO POWER SAVING (STANDBY MODE)

The camera will switch to the power-saving standby mode after a
preset time to extend battery life if this function is activated.
Factory setting: 10 min.
Other setting options are available via app.
Note
The camera can be reactivated from standby mode at any time by
pressing the shutter button or by switching the main switch off and
on again.
EN
35