Sangean REVERY R4 WFS-58 User Manual page 67

9. If setting the alarm to a radio option, press the Menu Up or Down buttons to highlight the 'Preset:'
option then press and release the Select button if you wish to change it. Choose from either the
radio station 'Last listened' to, or from the presets 1 - 10. Scroll to the chosen option and press the
Select button to confirm the selection.

Note: The alarm may only use a preset which has already been stored.
10. Press the Menu Up or Down buttons until the 'Volume:' option is highlighted on the display and
press and release the Select button if you wish to change it. The radio uses the saved volume
setting for each alarm when it sounds. Press the Menu Up or Down buttons to set the required
volume and then press and release the Select button to confirm the setting.
11. In order to store the alarm settings press the Menu Up or Down buttons until 'Save' is highlighted.
Press and release the Select button to store the alarm settings. Your radio will show 'Alarm saved'
and will then go back to the list of alarms with the new alarm setting shown in the display. If you
decide not to save the settings, press the Back button. The display will show 'Save changes' with
a 'YES' or 'NO' option. Press and release the Menu Left or Right buttons to choose 'NO' and then
press and release the Select button. 'Alarm not saved' will show on the display. Active alarms are
shown using small alarm indicators at the bottom of the playing displays and on the clock display
when in Standby.

Note: If you make a mistake at any point while setting the alarms, use the Back button to go back
to the previous screen.
66
Alarm 1
Enable: Once
Time: 07:30
Date: 06/04/2017
Mode: DAB
Preset: Last listened
Alarm 1 preset
Last listened
1. BBC Radio 2
2. Rock Antenne
3. Absolute Radio
4. [Not set]
Alarm 1
Time: 07:30
Date: 06/04/2017
Mode: DAB
Preset: Last listened
Volume: 20
Alarm 1 volume
Alarm
Saved